Skip to content

Articles

Building the Samovar

Building the Samovar takes 2–4 hours and requires no soldering of SMD components. The core is an ESP32 board (38 pin), to which you connect: 3–4 DS18B20 temperature sensors (boiler, column, head), an MPX5010D pressure… 

Parts needed to build Samovar

Minimum set of parts for the device to work: With this set, temperature monitoring in the column will work. If the internet is available and the Blynk app is installed on your phone, you will… 

Why Samovar exists

An open-source ESP32 controller for rectification, distillation, brewing and cheese-making. What Samovar can do today and how the rectification process works.

How the Samovar works

Two videos demonstrating how the Samovar works Sometimes it is better to see something once than to hear about it a hundred times. This page features two videos demonstrating how the Samovar works. The first…