Below you can see an example of the log from which Samovar builds its charts.
You can hide any data series by clicking its line in the legend (at the bottom), for example the Boiler temperature line. Clicking it again shows the series on the chart again. You can also change the level of detail. There are two sliders above the chart. By moving them you can select any level of detail you need for analysis.
You can view such a chart right while Samovar is running. After take-off is finished, you can save the log for later analysis and view it on a local computer.
While Samovar is taking off product, the chart refreshes automatically every 15 seconds, but you can turn this off by clearing the “Update chart” checkbox.
Please note: the chart is drawn on your computer, so if you work with a large log, this process may take a considerable time.
This page also has a “Save log” button, which saves the current log to your computer. If you forgot to save the log, you can save the previous one by clicking “Save old log”. Saved logs can later be viewed on your own computer using the chartlocal.htm page located in the Samovar tools folder. If saving logs to the cloud is enabled, you can view them on the site via the menu: User – Logs