# Remote access to ESP32

- Link: https://www.samovar-tool.ru/en/2021/09/13/remote-access-to-esp32/
- Published: 2021-09-13T14:49:23+03:00
- Author: kosoj.diy

Below is one way to set up remote access to Samovar. All the settings can be done
in a couple of minutes.

⌊Warning icon — safety precautions⌉⌊Warning icon — safety precautions⌉**Note:** 
This method is easy to implement, but it has one limitation: to connect remotely
this way you will need a computer that stays powered on. Any low-power computer 
will do, for example, you can run it on Raspberry Pi.

To create a tunnel to ESP32, you can use the free service [ngrok](https://ngrok.com).

Go to [https://ngrok.com](https://ngrok.com/) to create an account. Click the **“
Sign up”** button.

A form will open – fill in your details.

Once the account is created, log in and go to the **“Your Authtoken”** section. 
Copy the string from the **“Your Authtoken” ** field to a safe place (we will need
it later).

The token looks something like this: **69X1SnMSGqAz6qo9qDtHo_7hMsUHSb8tXCQaWQvzE5J**

### Installing ngrok

Go to the navigation panel and select the **“Setup & Installation”** tab.

Choose the ngrok version for your operating system and download it.

### Running ngrok

Unpack the archive.

Now enter the command below in a terminal window, but replace the **SAMOVAR_IP_ADDRESS**
and **YOUR_TUNNEL_TOKEN** parts with the IP address of Samovar and your ngrok tunnel
authentication token:

**ngrok tcp SAMOVAR_IP_ADDRESS:80 –authtoken YOUR_TUNNEL_TOKEN**

If you use Windows:

**ngrok tcp 192.168.1.11:80 –authtoken 69X1SnMSGqAz6qo9qDtHo_7hMsUHSb8tXCQaWQvzE5J**

If you use Linux:

**./ngrok tcp 192.168.1.11:80 –authtoken 69X1SnMSGqAz6qo9qDtHo_7hMsUHSb8tXCQaWQvzE5J**

If everything was done correctly, the **“Tunnel Status”** field should show the 
value **“online”**, and the **“Forwarding”** field should show a URL.

### Accessing the web server from anywhere in the world

Now for the most interesting part – accessing the web server from anywhere on the
planet. To do this, type the URL into your browser. Mine is **“http://0.tcp.ngrok.
io:14626”**, but yours will be different.

⌊Warning icon — safety precautions⌉⌊Warning icon — safety precautions⌉**Important:**
For the tunnel to stay **“online”**, your computer must stay powered on, and the
ngrok application must be running on it.

**Troubleshooting:** If you followed the ngrok link and nothing happened, open the
IP address of your ESP32 in a browser to check whether Samovar is working. If it
is, make sure you entered the correct IP address and authentication token in the
ngrok command above.

⌊Warning icon — safety precautions⌉⌊Warning icon — safety precautions⌉**Important:**
When you access the web server you will always be asked for the username and password
you registered with on ngrok, so unauthorized access to your device is practically
impossible.

Now you can control Samovar remotely!

### Like this:

Like Loading…

### _Related_
